T5T8 fluorescent lamp manufacturer asks 3 prevent led fluorescent lamp tube to point to namely which 3 prevent?

Generally speaking, it refers to waterproof, dustproof and anticorrosive. Therefore, the requirements are relatively high. The shell is made of special materials and must be sealed. The joint is silicone sealing strip to prevent water, dust, corrosive gas and other harmful substances. Its purpose is to protect the internal light tube from affecting the lighting. The traditional type consists of three parts, one is plastic shell, one is fluorescent lamp, the other is ballast, including inductive ballast and electronic ballast. The purpose is to activate the fluorescent lighting.

Nbsp; & nbsp; is a three proof LED fluorescent lamp. The method is that the traditional shell does not need to be replaced, only the interior fluorescent lamp is replaced, and the traditional fluorescent lamp is replaced by the energy-saving LED lamp. The advantage is that without any ballast, the wiring is simpler. Can be directly lit. The light efficiency is also improved, so the power can be lower. The benefit of t5t8 fluorescent lamp manufacturers is energy saving, and the electricity bill is coming down immediately. For example, the traditional 40W fluorescent lamp only needs 16-18w to replace. It is characterized by stability, high efficiency and energy saving. Of course, the derivative low voltage 36V can also be realized.

Nbsp; & nbsp; it's a single waterproof LED lamp with good price and quality. Power 18W, brightness more than 40W fluorescent lamp, waterproof plug, built-in power supply. It can be used for water-proof lamp with 220V voltage or 36V, 24V, 12V low voltage. Its waterproof ability is super. The lamp can be directly put into the water for testing, which can meet the three prevention requirements

When the power supply is turned on, the t5t8 fluorescent lamp manufacturer fails to turn on the two metal plates in the neon bubble of the starter, and the power supply breaks through the neon gas to conduct electricity. At this time, we see that the neon bubble glows and the neon gas heats up when conducting electricity, causing the bimetal plates in the neon bubble (that is, the one we see bent) to reduce the bending degree after heating, and at the same time, connect the two electrodes through a larger current.

The lighting environment of school classroom should take the visual health comfort as the primary condition. In the process of learning in the classroom, most of the time, students pay close attention. In order to better adapt to the lighting in the classroom, people's visual organs will adjust themselves, and make the eye muscles too tense, resulting in eye diseases, which obviously leads to myopia.